HP BladeSystem c3000 Specification page 12

QuickSpecs
Configuration Information Factory Integrated Models
HP c3000 KVM Modules
and Adapters
HP Optional Power Cords HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord
Step 3: Select additional (one to four) interconnects.
The following is a list of various HP BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel, and SAS
interconnects). A pair of interconnects must be ordered if redundancy is required. For detailed interconnect options consult the specific
interconnect QuickSpecs: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html.
NOTE: Options for specific c-Class interconnects are NOT included in the list below. Consult the individual interconnect QuickSpecs to
obtain part numbers for interconnect options such as cables, SFPs, etc.
NOTE: Interconnect Bay 1 must contain one of the "Ethernet" interconnect modules.
HP BladeSystem
c-Class Ethernet
Interconnects
power supply options you have selected can fully support your BladeSystem
configuration. The HP Power Advisor tool can be downloaded at
www.hp.com/go/hppoweradvisor.
NOTE: For a full enclosure, you can either order 4 or more power supplies to support a
N+1 redundant configuration or 6 power supplies to support a N+N redundant
configuration.
NOTE: Each enclosure must include only 1 type of power supply. All power supplies
must be AC or all DC power supplies. The Onboard Administrator will exhibit a mismatch
error due to mixed power supplies until all power supplies are matched.
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Platinum power supplies required to enable power discovery services.
NOTE: Include a 6ft C13 to C14 PDU power cord.
HP 1200W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: DC power supplies contain a -48V DC power cord designed for in-rack DC power
rectifiers.
NOTE: When this DC power supply (437573-B21) is ordered as a factory integrated
enclosure option, standard AC supplies are not included in the order shipment. When
this DC power supply is ordered with an enclosure, but not factory integrated, standard
AC power supplies are included in the order shipment and DC power supplies are shipped
separately.
HP BLc3000 KVM Option
NOTE: For use with in-rack KVM switches.
HP KVM USB2 1-pack Interface Adapter
NOTE: Order one KVM Adapter per c3000 enclosure, to support KVM switches accepting
RJ45 cables. Please see the Options section of this QuickSpecs for additional product
information.
NOTE: For use with PDU's accepting C20 power cords.
NOTE: Order 1 for each power supply.
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord
HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
HP 6125G/XG Ethernet Blade Switch
HP 6125G Ethernet Blade Switch
HP 6120G/XG Ethernet Blade Switch
HP 6120XG Blade Switch
HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
Cisco Catalyst 1/10GbE 3120X Blade Switch
DA - 12790 North America — Version 55 — December 10, 2013
HP BladeSystem c3000 Enclosure
656364-B21
437573-B21
437575-B21
AF603A
AF590A
A0N33A
638526-B21
455880-B21
658250-B21
658247-B21
498358-B21
516733-B21
406740-B21
538113-B21
451439-B21
Page 12