To install the seat, insert the projections on
the front of the seat into the seat holders and
push down on the seat at the rear.
NOTE:
_
Make sure that the seat is securely fitted.
_
1. Projection (× 2)
2. Seat holder (× 2)
EBU15230
Storage compartment
Maximum load limit: 2.0 kg (4 lb)
The storage compartment is located under
the seat. (See pages 4-20–4-21 for seat re-
moval and installation procedures.)
When storing any documents in the storage
compartment, be sure to wrap them in a plas-
tic bag so that they will not get wet. When
washing the ATV, be careful not to let any wa-
ter enter the storage compartment.
NOTE:
_
There is a check hose at the bottom of the
storage compartment. If any water collects in
this hose, remove the hose, empty it, and then
install it.
_
4-21