CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it
to the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
Changing the final gear oil
1. Remove the engine guard and the final
gear case guard by removing the bolts.
1. Engine guard
3. Bolt (× 11)
2. Place the ATV on a level surface.
3. Place a container under the final gear
case to collect the used oil.
8-18
2. Final gear case guard