3. If the coolant is at or below the minimum
level mark, remove panel D (See pages
8-7–8-8 for panel removal and installa-
tion procedures.), remove the reservoir
cap, add coolant to the maximum level
mark, install the reservoir cap, and then
install the panel.
Coolant reservoir capacity
(up to the maximum level mark):
0.25 L (0.22 Imp qt, 0.26 US qt)
CAUTION:
_
Hard water or salt water is harmful to the
engine. You may use soft water if you can-
not get distilled water.
_
NOTE:
_
G
If water is added, have a Yamaha dealer
check the antifreeze content of the cool-
ant as soon as possible.
The radiator fan operation is completely
G
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator.
_
If your ATV overheats, see page 8-62 for de-
tails.
8-23