Table of Contents
Advertisement
Control functions
To install the drive guard
1.
Fit the front slots in the drive guard over
the projections on the drive guard front
holder.
1
1. Drive guard
2.
Align the slots in the rear of the drive
guard with the projections on the drive
guard rear holder, and then insert the
drive guard locking pin into the holder as
shown.
1
2
1. Drive guard
2. Drive guard locking pin
24
ESU10761
V-belt holders
Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.
1. V-belt holder
ECS00180
NOTICE
Make sure that the V-belt is installed se-
curely in the holders.
ESU10811
Storage compartment
The storage compartment is located behind
the seat. Use the storage compartment to
store the tool kit, manuals, spare parts, or oth-
er small items.
To open the storage compartment
Turn the fastener 1/2 turn in either direction,
and then fold the storage compartment cover
up.
2
1. Fastener
2. Storage compartment
1
1
Advertisement
Table of Contents
