Drive Track; 51-Mm (2.0-In) High-Profile Pattern Drive Track; Slide Runners - Yamaha RX10J Owner's Manual

ESU00097

Drive track

Check the drive track for deflection, wear, or damage.
Adjust or replace if necessary. (See pages 8-28–8-30 for
more details.)
WARNING
@
Do not operate the snowmobile if you find damage to
the drive track, or if it has been maladjusted. Drive
track damage or failure could result in loss of brak-
ing ability and snowmobile control, which could
cause an accident.
@
ESU00243

51-mm (2.0-in) high-profile pattern drive track

For RX10M/RX10MS
This snowmobile is originally equipped with a 51-mm
(2.0-in) high-profile pattern drive track specifically for use
in deep snow riding conditions.
Therefore, avoid prolonged operation on hard surfaces
such as ice, hard-packed snow, dirt, etc., to extend the
life of the track and slide runners.
CAUTION :
@
G
Only use in deep snow riding conditions.
G Operation on areas with light snowfall, ice, hard-
packed snow, dirt, or grass will result in rapid
wear or damage to the track and slide runners
from lack of snow which serves as a lubricant.
@
ESU00098

Slide runners

Check the slide runners for wear and damage.
If the slide runners reach the wear limit, they should be
replaced.
1 Slide runners
a Wear limit
Wear limit height: 10 mm (0.4 in)
CAUTION :
@
Ride on fresh snow frequently. Operating on ice or
hard packed snow will rapidly wear the slide runners.
@
6-8