Speedometer Unit; High Beam Indicator Light - Yamaha RX10J Owner's Manual

ESU03900

Speedometer unit

The speedometer unit is equipped with the following:
G a digital speedometer (which shows riding speed)
G an odometer (which shows the total distance trav-
eled)
G
a tripmeter (which shows the distance traveled since
it was last set to zero)
G warning indicators (which show self-diagnosis, cool-
ant temperature, fuel level, and oil level warnings)
G a fuel meter (which shows the fuel remaining in the
fuel tank)
G
a grip/thumb warmer heat level indicator (which
shows the heat level of the grip warmer or the thumb
warmer)
After the engine is started, the tachometer 1 makes one
sweep, and the warning light 2 and all segments of the
meter 3 turn on and off once.
The grip warmer heat level is initially displayed for
5 seconds, then switches to the fuel meter display.
Odometer and tripmeter modes
Pushing the select/reset button 4 switches the display
between the odometer mode "ODO" and the tripmeter
mode "TRIP".
To reset the tripmeter, push the select/reset button for at
least one second while the tripmeter is displayed.
NOTE:
@
To switch the speedometer, odometer, and tripmeter dis-
plays between kilometers and miles, select the odometer
mode "ODO", and then push the select/reset button 4
for at least 10 seconds while the snowmobile is stopped.
@
ESU00363

High beam indicator light

The high beam indicator light 1 comes on when the high
beams of the headlights are switched on. (See page 5-12
for headlight beam switch operation.)
5-4