Idle Mode; Turbo Timer Mode; Status Update - Ultra Start 35 SERIES Owner's Manual

2WAY REMOTE STARTER

Idle Mode

1. While the vehicle is running with key, press button #3.
1 2 3
2. The park lights will turn on and the horn (optional) will honk once.
4
3. Turn the ignition key off and the vehicle will continue to run.
4. Exit the vehicle and leave it running safely without leaving the
keys in the Ignition.
Note: Always lock the doors while the vehicle is left running

Turbo Timer Mode

1 2 3
4
1.While the vehicle is running with key, press button #4.
2.The park lights will turn on and the horn (optional) will honk once.
3.Turn the ignition key off and the vehicle will continue to run for
approximately 2 minutes.
Note: Always lock the doors while the vehicle is left running

Status Update

1 2 3
This feature is used to check the status of the vehicle. If the system
4
does not update the remote after completing a function press
Button #4 on the transmitter. The remote will then display the current
status of the system on the LCD screen.
If the system is out of operating range the remote transmitter will
beep three times quicky after a button is pressed. The antenna icon
onthe top of the LCD will be gone or show no bars next to the icon.
unattended. The vehicle will stay running for the
programmed runtime (Default 15 minutes)
unattended.
OWNER'S GUIDE
Page 5