NETGEAR WN1000RP Installation Manual page 7

Option 1: Connecting with WPS (Wi-Fi Protected Setup)
1. Press the WPS button
2. Within 2 minutes, press the WPS button
router, gateway, or access point.
At this point, the WiFi Booster should be connected to your
existing WiFi network, and the Link Rate LED
WiFi Booster lights.
3. The WiFi Booster's wireless network name (SSID) changes to
your existing WiFi network name, with _EXT at the end of the
name.
For example:
Existing WiFi network name:
New WiFi Booster network name: MyNetworkName_EXT
4. Now connect your existing WiFi devices to the new WiFi Booster
network (MyNetworkName_EXT). Use the same network
security key (passphrase) as is set on your existing WiFi
network/WiFi router.
on the WiFi Booster.
MyNetworkName
7
on your wireless
on your