NETGEAR WN1000RP Installation Manual page 6

Connecting the WiFi Booster to an Existing 
WiFi Network
To extend the range of your WiFi network, you need to connect the
WiFi Booster to your existing WiFi network. You have two options
to connect the WiFi Booster to your network.
Option 1: Connecting with WPS (Wi-Fi Protected Setup)
WPS lets you easily join a secure WiFi network without typing
the network name and password. The WPS button is a
physical button on the WiFi router, gateway, or access point.
If your router supports WPS (Wi-Fi Protected Setup
NETGEAR recommends that you use Option 1; otherwise, go
to Option 2.
Tip: WPS does not support WEP network security. If you
are using WEP security, use Option 2 to connect.
Option 2: Connecting with web browser setup guide
The web browser setup guide walks you through the
necessary steps to connect your WiFi Booster to an existing
WiFi network.
6
),