NETGEAR Push2TV Getting Started Manual page 2

Update Your Push2TV
NETGEAR recommends that you update Push2TV as new
updates may support even more wireless display devices.
1. Use your laptop or mobile device to visit
www.netgear.com/ptv
2. Press and hold the Push2TV side button for 7 seconds.
3. On your laptop or mobile device, find and connect to the
Push2TV WiFi network name (SSID).
4. Open a browser and type http://192.168.3.1 in the URL bar.
5. Upload the firmware and install it.
For information about updating Intel Wireless Display software on
your laptop, visit http://www.intel.com/go/wirelessdisplayupdate.
2
and download new firmware.