HP 5120 SI Series Specification page 21

QuickSpecs
Accessory Product Details
HP X120 1G SFP LC BX 10-
D Transceiver (JD099B)
A small form-factor
pluggable (SFP) Gigabit LX-
BX10-D transceiver that
provides a full duplex
Gigabit solution up to
10km on a single mode
cable.
HP X120 1G SFP RJ45 T
Transceiver (JD089B)
A small form factor
pluggable (SFP) Gigabit
1000Base-T transceiver
that provides a full duplex
Gigabit solution up to
100m on a Cat-5+ cable.
Ports
Connectivity
Physical characteristics
Electrical characteristics Power consumption
Cabling
Notes
Services
Ports
Connectivity
Physical characteristics
Electrical characteristics Power consumption
Cabling
Services
DA - 13795 Worldwide — Version 12 — November 12, 2013
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex:
full only
Connector type
Dimensions
Full configuration weight 0.04 lb. (0.02 kg)
typical
Power consumption
maximum
Maximum distance:
• Up to 10km
Fiber type
TX 1490nm RX 1310nm
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
Dimensions
Full configuration weight 0.07 lb. (0.03 kg)
typical
Power consumption
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-
pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5120 SI Switch Series
LC
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.8 W
1.0 W
Single Mode
RJ-45
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
0.8 W
1.0 W
for details on
for details on
Page 21