Program Ae; Setting The Shutter Speed; Modes - *1; Exposure Compensation -2 - +2 - *3 - Canon PowerShot S60 User Manual

The shutter speed and aperture value will show
in red on the LCD monitor when the correct
exposure cannot be obtained.
When the flash fires, the shutter speed and
aperture value will show in white (for all
shooting modes except
The combinations of shutter speeds and
aperture values can be changed within the
same exposure setting (p. 73 - p. 75).
See page 174 for settings that can be changed
in this mode.
For information on the relation between the
aperture value and shutter speed, see page 74.
Please note that camera shake becomes a
factor at low shutter speeds. If the camera
shake warning
shoot using a tripod.

Program AE

Use the program AE mode to have the camera
automatically set the shutter speed and aperture
value to match the brightness of the scene.
If a correct exposure cannot be obtained, use the
following methods to solve the problem.
- Use the flash.
- Change the ISO speed setting.
- Change the light metering mode.
).
appears in the LCD monitor,
Differences between the
Modes.
The following settings can be adjusted in
but not in mode.
· Exposure Compensation
· ISO Speed · Bracket Mode
· Flash Exposure Compensation
· Flash (Flash on, Slow Synchro, 2nd-curtain)
· Photo Effect · Continuous Shooting
· File Format Settings
· Light Metering Mode
· Intervalometer · AF Frame
· FE Lock

Setting the Shutter Speed

When you set the shutter speed in the shutter speed-
priority AE mode, the camera automatically selects
an aperture value to match the brightness. Faster
shutter speeds allow you to catch an instantaneous
image of a moving subject while slower speeds
create a flowing effect and allow you to shoot without
a flash in dark areas.
6. Shooting-Advanced Functions
and
mode,
· White Balance
· Manual Focus
· AE Lock
73