Using Conversion Lenses (Sold Separately) - Canon PowerShot S60 User Manual

Using Conversion Lenses (Sold Separately)

The camera supports use of the separately sold Tele-
converter TC-DC10. In order to attach this lens, you
also need to use the separately sold Conversion
Lens Adapter LA-DC10.
Warning
When attaching the tele-converter, be sure to
screw it on securely. If they come loose, they may
fall from the lens adapter, posing risk of injury
from shattered glass.
Never look into the sun or into strong light
through the tele-converter as this can result in
blindness or impairment of vision.
If you use the built-in flash when shooting with
the tele-converter, the outer area of the
recorded image will come out relatively dark.
When using the tele-converter, please set the
focal length to the telephoto end. At other
zoom settings, the image will appear as if its
corners have been cut off.
You cannot use the viewfinder when the
conversion lens adapter is attached.
146 Appendix
This 37 mm-threaded diameter
magnifying conversion lens is for taking
Tele-converter
telephoto shots. The lens changes the
TC-DC10
focal length of the camera body's lens
by a factor of 2.
Filters cannot be attached to the tele-converter
lens.
Attaching a Lens
1
Open the lens cover to power up the
camera.
2
Align the conversion lens adapter
with the front of the camera, then
attach the conversion lens adapter to
the tripod screw hole.
a
b
c