1
Install the driver and the software
applications bundled on the Canon
Digital Camera Solution Disk (prior
to first connection only).
Please see the Canon Digital Camera Software
Starter Guide Disk for the installation
procedures.
With a Macintosh, it is next necessary to set the
ImageBrowser auto start settings (only with
PowerShot S70). Please see the Canon Digital
Camera Software Starter Guide Disk.
2
Use the supplied interface cable to
connect the computer's USB port to
the camera's DIGITAL terminal.
120
9. Additional Features
USB port
Interface cable
Windows
3
Proceed to steps
and
Macintosh
Refer to the Canon Digital Camera Software
Starter Guide Disk and download images.
DIGITAL Terminal
1. Open the terminal cover
with your finger nail.
2. Insert the connector until it
clicks.
Always grasp the
connector to remove the
USB cable from the
camera's DIGITAL
terminal.
4
below.