Removing The Card - Canon EOS 1Ds Mark III Instruction Manual

Memory card selection icon
CF card indicator
SD card indicator
The camera is compatible with both Type I and Type II CF cards which
differ in thickness. High-capacity (2GB or higher) CF cards, SD cards,
and hard disk-type cards can also be used.
The number of possible shots varies depending on the memory card's
capacity, image-recording quality, ISO speed, etc.
The [2 Shoot w/o card] menu option set to [Off] will prevent you from
forgetting to install a memory card.

Removing the Card

Installing and Removing the Memory Card
Set the power switch to <1>.
4
The number of possible shots will be
displayed on the top LCD panel and
in the viewfinder.
The rear LCD panel will indicate
which memory card(s) has been
installed. The images will be
recorded to the memory card with
the < > arrow next to the
respective card's indicator.
Open the cover.
1
Set the power switch to <2>.
Make sure the access lamp is off,
then open the cover.
Take out the memory card.
2
To remove the CF card, push the
eject button.
To remove the SD card, push it in and
release it.
Close the cover.
33