Canon EOS 1Ds Mark III Instruction Manual page 159

C.Fn I -4
0: On
The AEB and WB-BKT settings will be canceled when the power switch
is set to <2> or the camera settings are cleared. AEB will also be
canceled when bulb exposure is set or the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
C.Fn I -5
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, - , +
1: -, 0, +
2: +, 0, -
AEB
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : More blue
+ : Increased exposure
C.Fn I -6
The number of shots taken with AEB and white balance bracketing can be
changed from the usual 3 shots to 2, 5, or 7 shots. When C.Fn I -5-0 is set,
the bracketed shots will be taken as shown in the table below.
0: 3 shots
1: 2 shots
2: 5 shots
3: 7 shots
1st shot 2nd shot 3rd shot 4th shot 5th shot 6th shot 7th shot
0: 3 shots Standard (0)
1: 2 shots Standard (0)
2: 5 shots Standard (0)
3: 7 shots Standard (0)
Bracketing auto cancel
Bracketing sequence
B/A Direction
+ : More amber
Number of bracketed shots
-1 +1
-1
-2 -1
-3 -2
3 Custom Function Settings
WB bracketing
M/G Direction
- : More magenta
+ : More green
(1-stop increments)
+1 +2
-1 +1 +2 +3
159