Set The Printing Effects - Canon EOS 1Ds Mark III Instruction Manual

Digital slr camera
Hide thumbs Also See for EOS 1Ds Mark III:
Table of Contents

Advertisement

wPrinting
Item
EOff
EOn
EVivid
ENR
0 B/W
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural
zNatural M
EDefault
* The screen display may differ depending on the printer.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation.
142
4
Same as the printing characteristics turned "On". No automatic
correction will be performed.
The image will be printed according to the printer's standard colors.
The image's Exif data is used to make automatic corrections.
The image will be printed with higher saturation to produce
more vivid blues and greens.
The image noise is reduced before printing.
Prints in black-and-white with true blacks.
Prints the image in the actual colors and contrast. No automatic
color adjustments will be applied.
The printing characteristics are the same as the "Natural" setting. However,
this setting enables finer printing adjustments than with "Natural."
The printing will differ depending on the printer. For details, see
the printer's instruction manual.

Set the printing effects.

Set as necessary. If you need not set
any printing effects, go to step 5.
Turn the <5> dial to select the item
on the upper right, then press <0>.
If the <e> icon is displayed next to
<z>, the printing effects can also
be adjusted. (p.144)
Next, turn the <5> dial to select the
desired printing effect, then press <0>.
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos-1ds mark iii

Table of Contents