0 Selecting the Person to Focus On
You can select a specific person's face to focus on and then shoot.
Confirming the number of detected faces
Keeping the c button pressed will display the number of faces detected by the
camera (35 at the most) (green: main subject's face, white: detected face).
Not available in Zoom Blur, Stitch Assist or movie modes.
Register 0 to the c button
Set the Face Select mode.
Point the camera toward the face and
press the c button.
After [Face Select : On] displays, a face
will appear around the face
detected as the main subject.
Even if the subject moves, the frame will
follow the subject within a certain range.
If a face is not detected,
Select the face on which to focus.
If you press the c button, the frame will
move to another face detected by the
When the frame has made a full circuit of
all detected faces, the AF frame mode
screen will reappear.
Press the shutter button halfway. The face
frame of the focused face will change into
Press the shutter button fully to shoot.