Ò Using The Self-Timer - Canon Digital IXUS 990 IS User Manual

Ò Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
You can change the delay time and number of shots
Press the p button.
Select Ò.
Press the op buttons or turn the  dial
to select Ò, then press the m button.
Once set, Ò will appear.
Shoot.
Press the shutter button halfway to focus
on the subject, then press it fully.
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
To restore the original setting, select
in Step 2.
(p. 79).
63