Changing the Start-up Image or Sound
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
Changing the Start-up Screen
Select [Sound Options], then press the m
button.
Press the op buttons or turn the  dial
to select an option.
Press the qr buttons to change the sound.
1
Preset sound.
You can register your sounds using the
2
supplied software (ZoomBrowser EX/
ImageBrowser)
Select [Start-up Image], then press the m
button.
Press the qr buttons to change the image.
X
No start-up image.
1
Preset image.
You can register images that you have
2
taken.
(p.
142).
141