≈ Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
•
The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
•
When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
•
It is recommended to set the [IS Mode] to [Off] when shooting with a
tripod
(p.
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
92
Select ≈.
Select the shutter speed.
Confirm the exposure.
139).
Set the mode switch to 4, then select ≈
in Steps 1 – 3 on
button.
Press the o button.
Press the qr buttons or turn the  dial
to select shutter speed, then press the m
button.
When you press the shutter button
halfway, the exposure for the selected
shutter speed will appear.
and press the m
p. 47