TABLE 9
Port Speed
2 Gbps
4 Gbps
8 Gbps
Memory specifications
The Brocade 5100 has three types of memory devices.
TABLE 10
Type
Boot flash
Compact flash
Main memory (SDRAM)
Fibre Channel port specifications
The Fibre Channel ports in the Brocade 5100 are compatible with SWL, LWL, and ELWL SFP
transceivers. The strength of the signal is determined by the type of transceiver in use.
The ports meet all required safety standards. For more information about these standards, see
"Regulatory compliance"
The ports are capable of operating at 1, 2, 4, or 8 Gbps and are able to autonegotiate to the higher
speed.
Brocade 5100 Hardware Reference Manual
53-1000854-02
Laser Data Transmission Ranges
Cable Size
Short Wavelength (SWL)
(microns)
50
300 m (984 ft) (OM2)
500 m (1,640 ft) (OM3)
62.5
150 m (492 feet)
9
NA
50
150 m (492 ft) (OM2)
380 m (1,246 ft) (OM3)
62.5
70 m (230 feet)
9
NA
50
50 m (164 ft) (OM2)
150 m (492 ft) (OM3)
62.5
21 m (69 feet)
9
NA
Brocade 5100 memory specifications
Size
4 MB
1 GB
512 MB
on page 32.
Memory specifications
Long Wavelength (LWL)
Extended Long
Wavelength (ELWL)
NA
NA
NA
NA
10 km (6.2 miles)
40 km (24.8 miles)
without a Brocade
Extended Fabrics license;
50 to 100 km with a
Brocade Extended
Fabrics license
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
10 km
NA
A
31