Switching The Headset On And Connecting It - Sennheiser Presence Instruction Manual

Using the headset
paired +
paired
connected
16 | Presence

Switching the headset on and connecting it

Gently pull the on/off power slide away from the headset. The LED
flashes blue 3 times. The voice prompt "power on" is announced in the
headset.
The LED flashes 3 times blue every 2 seconds until the headset finds a
paired Bluetooth device to connect to. Once the connection is success-
fully established, one or two of the following voice prompts are
announced in the headset:
• "Phone one connected" for the first mobile phone
• "Phone two connected" for the second mobile phone or
• "Dongle connected" for the Sennheiser Bluetooth dongle.
3x
Only two out of the maximum eight paired Bluetooth devices can be
simultaneously connected to the headset ("paired + connected").
After switch-on, the headset automatically tries to connect to the two last
connected Bluetooth devices.
1. "power on"
2. „... connected"