4. Attach the Left and Right Seat Brackets (14,
15) to the Seat Frame (5) with two M8 x 125mm
Bolts (29), four M8 Washers (54), and two M8
Locknuts (10) as shown. Do not fully tighten
the Locknuts yet.
5. Attach a Seat Handle (59) to the round tube on
the Left Seat Bracket (14) with two M6 x 30mm
Bolts (49), two M6 Curved Washers (25), and
two M6 Locknuts (51). Make sure that the
Locknuts are in the hexagonal holes.
Attach the other Seat Handle (59) to the Right
Seat Bracket (15) in the same way.
4
54
54
29
5
51
59
Hexagonal
Holes
8
10
54
10
54
5
14
15
14
25
49
15
59