Weslo Purcuit4.2 Bike Manual page 12

12. While a second person holds the Console (16)
near the Upright (13), connect the console wires
to the two Pulse Wires (67), the Extension Wire
(52), and the Ground Wire (65).
Then, insert the wires into the Upright (13).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Upright (13) with four M4 x
16mm Self-tapping Screws (47).
13. Identify the Left Pedal (24).
Using an adjustable wrench, firmly tighten the
Left Pedal (24) counterclockwise into the left
arm of the Crank (21).
Tighten the Right Pedal (not shown) clockwise
into the right arm of the Crank (not shown).
Adjust the strap on the Left Pedal (24) to the
desired position, and press the end of the strap
onto the tab on the Left Pedal. Adjust the strap
on the Right Pedal (not shown) in the
same way.
14. Make sure that all parts are properly tightened before you use the exercise bike. Extra parts may be
included. Place a mat under the exercise bike to protect the floor.
12
47
13
13
24
Tab
Strap
12
16
67
52 65
Avoid pinching
the wires
21