Use Of Aluminum Foil - GE JGSP30 Use And Care Manual

Roasting is cooking by dry heat. Tender meat or
poultry can be roasted uncovered in your oven.
Roasting temperatures, which should be low and
steady, keep spattering to a minimum.
Roasting is really a baking procedure used for meats.
Therefore, oven controls are set for Baking or Timed
Baking. (You may hear a slight clicking sound,
indicating the oven is working properly.) Timed
Baking will turn the oven on and off automatically.
1. Place the shelf in A or B position. No preheating
is necessary.
2. Check the weight of the
meat. Place the meat
fat-side-up, or poultry
breast-side-up, on
roasting rack in a
shallow pan. The
melting fat will baste i
the meat. Select a Dan
as close to the siz~ of the meat as possible.
(The broiler pan with rack is a good pan for this.)
u
BAKE
n
4. Press the INCREASE or DECREASE
displayed.

Use of Aluminum Foil

You can use aluminum foil to line the broiler pan.
This makes clean-up easier when using the pan for
marinating, cooking with fruits, cooking heavily
cured meats or basting food during cooking. Press
the foil tightly around the inside of the pan.
- —
(continued next page)
Most meats continue to cook slightly while standing,
after being removed from the oven. The standing time
recommended for roasts is 10 to 20 minutes. This
allows roasts to firm up and makes them easier to
carve. The internal temperature will rise about 5° to
10"F.; to compensate for the temperature rise, if
desired, remove the roast from oven sooner (at 5° to
10"F. less than the temperature in the Roasting Guide).
Remember that food will continue to cook in the hot
oven and therefore should be removed when the
desired internal temperature has been reached.
The oven will start automatically. The word "ON"
and "100°" will be displayed. As the oven heats up,
the display will show the changing temperature.
When the oven reaches the temperature you set, a
tone will sound.
5. Press the CLEAWOFF pad when
roasting is finished and then remove
CLEAR
the food from the oven.
n
NOTE: A fan may automatically turn on and off to
cool internal parts. This is normal, and the fan may
continue to run after the oven is turned off.
To change the oven temperature during the
roasting cycle, press the BAKE pad and then
the INCREASE or DECREASE pad to get the
new temperature.
21