8760 S. Sandy Parkway WIRE COLOR CONDUCTOR Sandy, Utah 84070, USA Normal April 30, 1996 LIVE BROWN BLACK European Contact: Your Local dbx Sales and Service Office or NEUTRAL BLUE WHITE International Sales Office EARTH GND GREEN/YEL GREEN 68 Sheila Lane...
¨ manual contents ARRANTY NTRODUCTION EATURES NSPECTION ONNECTING THE TO YOUR UDIO YSTEM RONT ANEL PERATIONS PPLICATIONS PECIAL PPLICATIONS PECIFICATIONS...
Page 4
902 in separating high frequencies from low frequencies can be user adjusted over a range of 800 Hz to 8 kHz. This, in conjunction with the HF only mode, enables the 902 to be used for special, non-vocal applications such as removing ÒclicksÓ...
Page 5
UTPUTS The output of the 902 is designed to feed balanced or unbalanced loads of 600 ½ or greater. The output stage is single-ended; in normal operation the B- terminal is connected internally to the circuit ground. When the bypass switch is engaged, the signal inputs are directly connected to the signal output (i.e.
OUT, or BYPASS mode and hum may increase. ONNECTIONS FOR PECIAL PPLICATIONS Skip this step if you do not intend to use any of the 902 special applications listed below. Refer to the listed page for information and installation steps for each application. RONT ANEL...
Page 7
¨ The CV input provides direct access to the control port of the dbx VCAof the 902 for gain control. This provides the user with the ability to use the 902 as an automatable level control. The dbx VCA provides linear-gain tracking in decibels over a range of -100 to +40 dB with 1% accuracy.
Page 8
¨ 8760 South Sandy Pkwy. Sandy, Utah 84070 Phone: (801) 568-7660 Fax: (801) 568-7662 IntÕl Phone (219) 462-0938 IntÕl Fax: (219) 462-4596 A Harman International Company Questions or comments? E¥mail us at: customer@dbxpro.com or visit our World Wide Web home page at: http://www.dbxpro.com This manual is part no: 18-2015-B...
Need help?
Do you have a question about the 902 and is the answer not in the manual?
Questions and answers