Connections 1; System Requirements - Sanyo VCC-XZN600P Installation Manual

Connections 1

■ Connection when Using PoE (Power over Ethernet) Power Supply
This camera provides simultaneous delivery of video in the JPEG and H.264 formats and also
bi-directional video between the camera and PC.
● Do not use the power supply of the camera.
● Do not supply power to the PoE hub or PoE power adapter until the camera installation
is finished.
● System Requirements
The system requirements for camera operation via network are as follows:
• PC: IBM PC/AT and compatibles
• OS: Windows XP Home Edition/Windows XP Professional
• CPU: Pentium IV (2.0 GHz or higher) (3.0 GHz or higher for using the VA-SW3050Lite)
• Memory: 512MB or more (1 GB or more for using the VA-SW3050)
• Network interface: 10Base-T/100Base-TX (RJ-45 connector)
• Graphics processor: nVIDIA: GeForce 6000 series or higher
• Display card: 1024 x 768 pixels or higher, 16 million colors or higher
• Web browser: Internet Explorer Ver.6.0 or higher
Connect the camera to the LAN through a switching hub using shielded LAN cables.
When directly connecting
the camera to a PC, use
the LAN cable (cross
type).
When using the IE/VA-SW3050Lite/
VA-SW3050 client version:
TV monitor
Video output
(BNC connector)
MEMO: You may extend the transmission distance by using multiple switching hubs with PoE support.
For details on the extendable distance, please refer to the hub performance in the
specifications, etc.
ATI: RADEON X1000 series or higher
PC
You need a PC for the
VA-SW3050 server version.
LAN cable (CAT5 or
higher, straight type)
Max. 100 m/109 yds
LAN cable
(CAT5 or higher, straight type)
Max. 100 m/109 yds
Switching hub
7
PC
When using the IE/VA-SW3050Lite/
VA-SW3050 server version:
You need the VA-SW3050
client version to view live/
replayed video, because the
VA-SW3050 server version is
used for recording purpose
only.