Main Specifications 2; Vcc-Xz600P - Sanyo VCC-XZN600P Installation Manual

Main specifications 2

Television system
Image sensor
Effective pixels
Scanning system
Synchronization method
Video output
Horizontal resolution
Lowest image illumination
Video S/N ratio
Lens
Electronic zoom
Alarm input
Alarm output
Focus/Zoom control
Waterproof standard
Communication method
Operating ambient
temperature/humidity
Power source
Power consumption
Weight
PAL color standards
1/4" interline transfer CCD
752 (Horizontal) x 582 (Vertical)
2:1 interlaced, 625 lines
Internal synchronization/Line lock (with vertical phase adjustment)
1.0 V (p-p)/75Ω, BNC connector
540 TV lines, typical
0.8 lx (at F1.4, color mode, Gain: High)
0.04 lx (at F1.4, B/W mode, Gain: High)
50 dB or more (AGC OFF)
Motorized zoom (x30 optical zoom)
Auto-Focus, auto iris lens, f=3.5 - 105 mm (F1.4 - 3.7)
Max. x16 (combined with optical zoom gives max. x480)
Control terminal x 2, NO (Normal Open) or NC (Normal Close)
Also used for Day/Night switching.
Control terminal x 1, NO/NC switching, open collector
Control voltage: ± (6 - 12 V) DC
IP66
System connection terminals (RS-485/Coaxial, UTP (NVT built-in), support of camera control
unit (VAC-70))
-10 - +50°C/14 - +122°F, 90% RH max. (no condensation)
With power source connected: -20 - +50°C/-4 - +122°F
• 24 V AC ± 10%, 50 Hz
• 12 - 15 V DC
4.9 W
With sunshade: Approx. 2.0 kg/65 oz.
Without sunshade: Approx. 1.8 kg/58 oz.
20

VCC-XZ600P