Advertisement
For the electrical connection of the power cord is present in the supply. Follow the instructions below.
Connect the ground cable yellow / green to terminal symbol
1. Remove the terminal cover (A) by unscrewing the screw and insert the cover into the hinge (B) of the terminal.
2. Plug the power cord into the clamp and connect the wires to the terminal block as shown in the wiring diagram located near the terminal.
3. Secure the power cable with the cable clamp.
4. Close the cover (C) and screw on the terminal with the screw removed.
For each connection to the network, the hob automatically checks for a few seconds.
E
L1 L2
N1 N2
E
L1 L2
N1 N2
.
E
L1 L2
N1 N2
E
L1 L2
N1 N2
EN7
L1
L2
N
N2
N1
Colour Grey
Colour Blue
Colours Brown
Colour Black
Colour Yellow-Green
Advertisement
