Weider 900 User Manual page 7

2. Attach the Upright (3) to the Base (1) with the
two M8 x 63mm Carriage Bolts (58) and two
M8 Nylon Locknuts (69). Do not tighten the
Nylon Locknuts yet.
Attach the Press Frame Lock (39) to the
Upright (3) with an M8 x 63mm Bolt (66), two
M8 Washers (71), and an M8 Nylon Locknut
(69). Do not overtighten the Nylon Locknut;
the Press Frame Lock must pivot easily.
3. Set the two Weight Bumpers (17) over the indi-
cated holes in the Stabilizer (2).
Orient the two Weight Guides (10) so that the
indicated holes are near the lower ends. Insert
the Weight Guides into the Weight Bumpers
(17) and the holes in the Stabilizer (2). Attach
the Weight Guides with two M10 x 70mm Bolts
(57), two M10 Washers (70), two Small Spacers
(37), and two M10 Nylon Locknuts (68).
Tighten the M10 Nylon Locknuts (68) used in
steps 1 and 3.
2
39
66
71
71
69
69
1
3
68
7
3
69
58
10
Holes
70
17
37
68
2
57