Compilation And Publication; Choosing A Location - Brother ADS-1000W Quick Setup Manual

Product Safety Guide

Compilation and Publication

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the
latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and
shall not be responsible for any damages (including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the publication.

Choosing a location

Put your machine and AC adapter (hereinafter collectively referred to as "the unit") on a flat, level, stable surface
that is free of vibration and shocks, such as a desk. Choose a location where the temperature remains between
41°F and 95°F (5°C and 35°C) and the humidity is between 20% to 80% (without condensation).
WARNING
DO NOT expose the unit to direct sunlight, excessive heat, open flames, corrosive gasses, moisture or
dust.
DO NOT place the unit on a carpet or rug, as this will expose it to dust. Doing so may create a risk of
an electrical short or fire. It may also damage the unit and/or render it inoperable.
DO NOT place the unit near heaters, air conditioners, electric fans, refrigerators, radiators, or water.
Doing so may create the risk of a short circuit or fire should water come into contact with the unit
(including condensation from heating, air conditioning, and/or ventilation equipment that may be
sufficient to create a short circuit or fire).
DO NOT place the unit near chemicals or in a place where chemicals could be spilled on it. Should
chemicals come into contact with the unit, there may be a risk of fire or electric shock. In particular,
organic solvents or liquids such as benzene, paint thinner, polish remover, or deodorizer may melt or
dissolve the plastic cover and/or cables, resulting in a risk of fire or electric shock. These or other
chemicals may also cause the unit to malfunction or become discolored.
21