American DJ Vizi Roller Beam 2R User Instructions page 18

Vizi Roller Beam 2R
press ENTER.
2. Press the UP or DOWN buttons until "Reset Gobos" is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Reset Shutter - With this function you can reset the shutter motor.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Reset Shutter" is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Reset Others - With this function you can reset all other motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Reset Others" is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
EFFECT ADJUST
Test Channel - With this function you can test/correct each channel
function.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Effect Adjust" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Test Channel" is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the various chan-
nels.
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 34
System Menu
Vizi Roller Beam 2R
4. Press ENTER or press MODE/ESC to exit.
Manual Control - With this function you can easily adjust the lamp.
All effects will be canceled, the shutter will open and output intensity
will be 100%. With the individual functions you can focus the light on
flat surface (a wall) and finely adjust the lamp.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Effect Adjust" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Manual Control" is dis-
played, press ENTER.
3. Use the UP or DOWN buttons to scroll through the various func-
tions. Press ENTER when you find the function you would like to
adjust.
4. Press ENTER or press MODE/ESC to exit.
Calibration - With this function you can calibrate and adjust the
effects wheels to their correct positions. The Calibration password
050.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Effect Adjust" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Calibration" is displayed,
press ENTER.
3. "XXXX" will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE/ESC to exit.
USER MODE SET
User Mode -
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "User Mode Set" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "User Mode" is displayed,
press ENTER.
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 35
System Menu