American DJ Vizi Roller Beam 2R User Instructions page 17

Vizi Roller Beam 2R
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Temperature C/F - With this function, you can change the tempera-
ture display to show either Celsius or Fahrenheit.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Personality" is highlighted, then press
ENTER.
2. Press UP or DOWN buttons, until "Temperature C/F" is dis-
played, and press ENTER.
3. Either "Celsius" or "Fahrenheit" will be displayed, use the UP and
DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Initial Status- In this menu you are able to check initial effect posi-
tion.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Personality" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until "Initial Status" is displayed,
press ENTER.
3. "PAN =XXX" will be displayed. "XXX" represents the current effect
position.
4. Press ENTER or press MODE/ESC to exit.
Reset Default -
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Personality" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until "Reset Default" is displayed,
press ENTER.
3. Either "Off" or "On" will be displayed, use the UP and DOWN but-
tons to toggle between.
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 32
System Menu Vizi Roller Beam 2R
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
RESET FUNCTION
Reset All - With this function you can all the motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Reset All" is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Reset Pan & Tilt - With this function you can reset the Pan & Tilt
motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Reset Pan/Tilt" is dis-
played, press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Reset Colors - With this function you can reset the color wheel.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Reset Colors" is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Reset Gobos - With this function you can reset the gobo wheel.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Reset Function" is highlighted, then
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 33
System Menu