Modifying The Route Calculation Conditions; Items That Users Can Operate - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 26 Thursday, April 20, 2006 3:47 PM
Modifying the Route Calculation
Conditions
You can modify the conditions for route calcula-
tion and recalculate the current route.
1
Touch [Destination] in the navigation
menu, and then touch [Route Overview].
[Route Overview] is displayed only when
the route is set.
2
Touch [Options].
3
Touch the desired items to change the
route calculation conditions and then
touch [OK].
The route is recalculated, and "Route confir-
mation screen" appears.
When a single route is calculated, the system
searches the route that meets these condi-
tions as much as possible.
A single route is calculated in the following
cases:
– When a waypoint is set
– When a route is set through voice recogni-
tion
– When auto reroute is carried out

Items that users can operate

Settings marked with an asterisk (*) show that
they are default or factory settings.
Route Condition
This setting controls which the route should be
calculated by taking into account the time or the
distance or the main road.
26
Determine which condition takes priority for
route calculation.
[Fast]*:
Calculate a route with the shortest travel time to
your destination as a priority.
[Short]:
Calculate a route with the shortest distance to
your destination as a priority.
[Main Road]:
Calculate a route that passes major arterial road
as a priority.
Avoid Toll Road
This setting controls whether toll roads (including
toll areas) should be taken into account.
[Off]*:
Calculate a route that may include toll roads
(including toll areas).
[On]:
Calculate a route that avoids toll roads (including
toll areas).
The system may calculate a route that
includes toll road even if [On] is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
[Off]*:
Calculate a route that may include ferries.
[On]:
Calculate a route that avoids ferries.
The system may calculate a route that
includes ferryway even if [On] is selected.
Avoid Motorway
This setting controls whether motorways may be
included in the route calculation.
[Off]*:
Calculate a route that may include motorways.
[On]:
Calculate a route that avoids motorways.