How To Move The Treadmill - NordicTrack Elite 9700 Pro Treadmill Manual

HOW TO MOVE THE TREADMILL

Due to the size and weight of the treadmill, moving
it requires two or three persons.
Before moving the treadmill, plug in the power cord
and insert the key into the console (see HOW TO
TURN ON THE POWER on page 18). Raise the
incline to the highest position. Then, remove the key
and unplug the power cord.
1. Hold the frame firmly in the location shown
below. CAUTION: To decrease the possibility of
damage to the treadmill or of injury, do not lift
the treadmill by the handrail. Raise the tread-
mill until the treadmill rolls freely on the wheels.
Carefully roll the treadmill to the desired location
and then lower it to the level position. CAUTION:
To reduce the risk of injury, use extreme cau-
tion while moving the treadmill. Do not attempt
to move the treadmill over uneven surfaces.
1
Frame
Wheels
30
2. After the treadmill is placed in the location where
it will be used, make sure that the leveling feet
rest firmly on the floor. If the treadmill rocks even
slightly, loosen one of the nuts, turn the leveling
foot clockwise or counterclockwise until the rocking
motion is eliminated, and then retighten the nut.
2
Nuts
Leveling Feet