When Installing The Aerial Outside The Vehicle (On The Body) - Pioneer AVIC-F700BT Installation Manual

Section
04 Installation
When installing the aerial
outside the vehicle (on the body)
Put the GPS aerial in a position as level as pos-
sible, such as on the roof or boot lid. (The GPS
aerial is fastened with a magnet.)
When routing the lead in from inside the boot
Clamps
Use clamps to secure
the lead where
necessary inside the
vehicle.
Rubber packing
26
Engb
GPS aerial
When routing the lead in from the top of the
door
Makea U-shaped loop in the lead on
the outside to prevent rainwater
from flowing along thelead into the
interior of the vehicle.
Clamps
Use clamps to secure
the lead where
necessary inside the
vehicle.
Water proofpad
Make sure the water proofpad
contacts the top of the rubber
packing.
Makea U-shaped loop in the
lead outside the rubber
packing to prevent rainwater
from flowing along the lead
into the interior of the vehicle.