Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Equalizer - Pioneer DEH-P7100BT Operation Manual

Audio Adjustments

Introduction of audio
adjustments
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
FAD BAL (balance adjustment)—Powerful
(graphic equalizer adjustment)—50Hz (7-band
graphic equalizer adjustment)—Loudness
(loudness)—Sub W1 (subwoofer on/off set-
ting)—Sub W2 (subwoofer setting)—Bass
(bass boost)—HPF (high pass filter)—SLA
(source level adjustment)—ASL (automatic
sound levelizer)—Guidance VOL (voice gui-
dance volume adjustment)
# You can select the Sub W2 only when sub-
woofer output is turned on in Sub W1.
# When selecting FM as the source, you cannot
switch to SLA.
# If Language select (language selection) is set
to РУССКИЙ, Guidance VOL cannot be ad-
justed.
# If TELEPHONE is selected as a source, only
FAD BAL (balance adjustment) and
Guidance VOL (guidance volume) can be oper-
ated.
# To return to the display of each source, press
BAND/ESC/CANCEL.
# If you do not operate functions except for
50Hz within about 30 seconds, the display is
automatically returned to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Display the audio menu.
Refer to Introduction of audio adjustments on
this page.
2 Use MULTI-CONTROL to select FAD BAL
in the audio function menu.
3 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
FAD F15 to FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Sub W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer output on
page 50.
4 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
BAL L15 to BAL R15 is displayed as the left/
right speaker balance moves from left to
right.

Using the equalizer

The equalizer lets you adjust the equalization
to match the car's interior acoustic character-
istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural
Natural
Vocal Vocal
Section
10
43
En