Using Compression And Bass Emphasis; Using Its Playlists - Pioneer DEH-P7100BT Operation Manual

Available accessories
Function name Operation
Refer to Selecting a repeat play
range on page 21.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
Repeat
player are:
! MCD – Repeat all discs in the
multi-CD player
! Track – Repeat just the current
track
! Disc – Repeat the current disc
Refer to Playing tracks in random
Random
order on page 21.
Refer to Scanning folders and
Scan
tracks on page 21.
Refer to Pausing playback on page
Pause
21.
Refer to Entering disc titles on
Title input
page 22.
Notes
! To return to the playback display, press
BAND/ESC/CANCEL.
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during Track, the repeat play range
changes to Disc.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
COMP/DBE in the function menu.
# If the multi-CD player does not support
COMP/DBE, No COMP is displayed when you at-
tempt to select it.
3 Press MULTI-CONTROL to select your fa-
vorite setting.
OFF—COMP 1—COMP 2—OFF—DBE 1—
DBE 2

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
3 Use MULTI-CONTROL to select
ITS memory in the function menu.
4 Select the desired track by pushing
MULTI-CONTROL left or right.
5 Push MULTI-CONTROL up to store the
currently playing track in the playlist.
Memory complete is displayed and the cur-
rently playing selection is added to your play-
list.
6 Press BAND/ESC/CANCEL to return to
the playback display.
Section
13
57
En