12
BRAKE SYSTEM
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.
Preparatory work
–
Raise the motorcycle with a lift stand. (
(50 SX)
–
Remove the chain guard. (
–
Remove the rear wheel.
Main work
–
Remove the lock washer
–
Remove screw
700492-01
–
Remove the brake linings.
–
Clean brake caliper and brake caliper support.
700493-01
–
Remove screws
–
Take off cover
–
Press the brake piston back to its basic position and make sure that no brake fluid
overflows from the brake fluid reservoir.
201175-12
–
Insert the brake linings.
Info
Ensure that the brake linings are correctly positioned in the holding spring.
700493-10
p. 37)
(
p. 56)
x
.
1
.
2
.
3
with washer
and membrane
4
5
p. 27)
.
6
53