11
SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
»
If there is no gap between the chain and the upper edge of the screw:
–
Change the chain sliding guard.
–
Check the chain sliding guard for tightness.
»
If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
L00425-10
guard
Screw, chain sliding
guard
–
Check the chain sliding piece for wear.
»
If the drill hole becomes visible on the chain sliding piece in area
–
Change the chain sliding piece.
–
Check the chain sliding piece for tightness.
»
If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
L00426-10
x
M5
5 Nm
(3.7 lbf ft)
M6
6 Nm
(4.4 lbf ft)
x
EJOT PT K60x20
90
–
Loctite
®
243™
:
C
2 Nm (1.5 lbf ft)