Clean Cycle - GE Gas Ranges Owner's Manual

How to set
The clean cycle takes about 5 hours plus about
the 27 "
30 minutes to cool down.
oven for
1 Push in the CLEAN selector button on the
self-cleaning
2 Set the thermostat dial to CLEAN.
• Cooling blower turns on.
• The OVEN ON light and HEATING light
• The DOOR LOCKED light turns on.
3 When cleaning has finished, push the OFF
The blower and the OVEN ON light will turn
off once the cycle has finished.
The door latch will open automatically after the
oven temperature falls below 550°F.
After a
If white spots remain, remove them with warm
sudsy water and rinse thoroughly with a

clean cycle

vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed
by the clean cycle.
right hand side of the control panel above
the thermostat dial.
turn on.
selector button.
If the oven is not clean after one clean cycle,
repeat the cycle.
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
27" oven control
25