Checks And Maintenance Steps For Winter Operation - KTM 200 DUKE EU Owner's Manual

CLEANING, CARE

Checks and maintenance steps for winter operation

17.2
Info
If the motorcycle is used in the winter, salt can be expected on the roads. Precautions need to be taken against road salt corrosion.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance the corrosive effects of
salt.
–
Clean the motorcycle. (
–
Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly wash the brake calipers and brake
linings with cold water and dry carefully. This should be done after the parts are
cooled down and while they are installed.
After riding on salted roads, thoroughly wash the motorcycle with cold water and
dry it well.
401060-01
–
Treat the engine, swingarm, and all other bright and zinc-plated parts (except for the
brake discs) with a wax-based corrosion inhibitor.
Info
Corrosion inhibitor is not permitted to come in contact with the brake discs as
this would greatly reduce the braking force.
–
Clean the chain. (
p. 135)
p. 74)
137