To Cancel The Timer; Power Outage; Oven Set Knob - GE EGR2000 Owner's Manual And Installation Instructions

OVEN CONTROL, CLOCK AND TIMER
Automatic Clock
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a Timed Baking or Self-Cleaning cycle.
Timer
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting
on the timer is 11 hours and 59
minutes.

To Cancel the Timer

To cancel the timer, the remaining time must be in
the display. To recall the time remaining, press the
TIMER ON/OFF pad once. To cancel the timer press
the TIMER ON/OFF pad again.

Power Outage

On some models, after a power outage the oven will
automatically resume its setting once the power is
restored.
For models with a CLOCK pad, when the power is
restored the display will flash the time of day until a
pad is pressed or the knob is turned. Reset the clock
to the correct time of day.
If the oven was in operation when the power outage
occurred, the Oven Set knob must be turned back to
OFF. Then reset the knob to the way it was before the
power outage.
If your model has a COOK TIME ON/OFF pad
and your oven was set for timed baking or roasting
when the power outage occurred, the clock and all
programmed functions must be reset. To reset them,
first turn the Oven Set knob back to OFF, reset the
clock, functions and knob back to the way they were
before the power outage.
To Set the Clock
To Set the Timer
1. Press the TIMER
ON/OFF pad.
2. Press the HOUR and MIN. pads
until the amount of time you
want shows in the display. The
timer will start automatically
within a few seconds of
releasing the pad.
End of Cycle Tones
The end of cycle tone can be cleared by pressing the
TIMER ON/OFF pad or, on some models, by
pressing the COOK TIME ON/OFF pad depending
on which function you are using.

Oven Set Knob

The Oven Set knob
maintains the
temperature you set
from WARM (170°F.)
to BROIL (550°F.).
It also has an OFF
and a CLEAN setting.
The PREHEATED light glows when the oven
reaches your selected temperature.
The OVEN ON light will glow any time the Oven
Set knob is not in the OFF position and is set on a
temperature or a function.
1. Press the CLOCK pad.
2. Press the HOUR and MIN. pads to set
the time of day.
To Reset the Timer
If the display is still showing the
time remaining, you may change it
by pressing the HOUR and MIN.
pads until the time you want
appears in the display.
If the remaining time is not in the
display, recall the remaining time
by pressing the TIMER ON/OFF
pad and then pressing the HOUR
and MIN. pads until the new time
you want shows on the display.
(on some models)
Appearance may vary.
11