Start To Use; Switch Your Monitor On/Off Or To Standby; Switch Channels - Philips 191TV4L User Manual

5 Start to use

This section helps you perform basic monitor
operations.
Switch your monitor on/off
or to standby
To switch on
• If the standby indicator is off, press
Power at the side of the monitor.
• If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
• Press Power at the side of the monitor.
» The standby indicator switches off.
Tip
•
Though your monitor consumes very little
power when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the monitor power
cable from the power outlet.
Note
•
If you cannot locate your remote control and
want to switch on the monitor from standby,
POWER at the side of the monitor.
press

Switch channels

• Press P +/-, or enter a channel number
using the numeric buttons on the remote
control.
Press the CH +/- button at the side of the
•
monitor.
EN
9