Features Of Console; How To Turn On Power - NordicTrack Elite 10.7 Elliptical Manual

FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button.
While you exercise, the console will display continu-
ous exercise feedback. You can even measure your
heart rate using the handgrip heart rate monitor or the
included chest heart rate monitor.
The console also offers a selection of onboard
workouts. Each workout automatically changes the
resistance of the pedals as it guides you through an
effective workout. You can even set a customized
workout goal with the set-a-goal workout.
The console also features an iFit mode that enables
the console to communicate with your wireless network
through an optional iFit module. With the iFit mode,
you can download personalized workouts, create your
own workouts, track your workout results, race against
other iFit users, and access many other features. To
purchase an iFit module at any time, go to
www.iFit.com or call the telephone number on the
front cover of this manual.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
To use the manual mode, see page 17. To use
an onboard workout, see page 19. To use a
set-a-goal workout, see page 20. To use an iFit
workout, see page 21. To change console set-
tings, see page 22. To use the sound system, see
page 22.
Note: If there is a sheet of plastic on the display,
remove the plastic.
HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
13). Next, locate the
power switch on the frame
near the power cord. Press
the power switch to the
reset position.
The display will then turn on and the console will be
ready for use.
Note: When you turn on the power for the  rst
time, the incline of the ramp may calibrate auto-
matically. The ramp will move upward and downward
as it calibrates. When the ramp stops moving, the ramp
is calibrated.
IMPORTANT: If the incline of the ramp does not
calibrate automatically, see HOW TO CALIBRATE
THE RAMP on page 24 and manually calibrate
the ramp.
IMPORTANT: The console features a display demo
mode, designed to be used if the elliptical is dis-
played in a store. If the demo mode is turned on,
the console will not turn off and the display will not
be reset when you  nish exercising. To turn off the
demo mode, see step 3 on page 22.
16
Reset
Position