Using The Clock And Timer - GE 164D3333P033 Owner's Manual

Using the clock and timer.

Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 55 minutes.
or
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
To Set the Clock:
Press the CLOCK pad.
1
Press the + and – pads.
2
Press the CLOCK pad to start.
3
To Set the Timer:
Press the TIMER ON/OFF pad.
1
Press the + and – pads until the amount of time
2
you want shows in the display. The timer will start
automatically within a few seconds of releasing
the pad.
To Reset the Timer:
If the display is still showing the time remaining, you
may change it by pressing the the + and – pads until the
time you want appears in the display.
If the remaining time is not in the display, recall the
remaining time by pressing the TIMER ON/OFF pad and
then pressing the the + and – pads until the new time
you want shows in the display.
To Cancel the Timer:
Press the TIMER ON/OFF pad once. To cancel the
timer press the TIMER ON/OFF pad again and hold
for 4 seconds.
End of Cycle Tones
Clear the tones by pressing the pad of the function you
are using.
If you would like to remove the signal that beeps every 6
seconds, press and hold the CLEAR/OFF pad for 10
seconds.
To return the signal, press and hold the CLEAR/OFF pad
for 10 seconds.
21