4-1. Routine Maintenance
4-2. Overload Protection
OM-1085 Page 16
SECTION 4 – MAINTENANCE
Y Disconnect power before maintaining.
Every Month
3 Months
Replace
Unreadable
Labels
6 Months
OR
1
Blow Off Neoprene
Seals On Slide.
Replace
Cracked
Parts
Blow Out Or
Vacuum Unit.
During Heavy
Service, Clean
Monthly.
Y Turn Off and unplug unit.
1
Fuse F1 protects oscillator control
from overload. If F1 opens, oscilla-
tor control shuts down, but pilot light
remains on. Replace F1.
Cords
Fuse F1 (See Parts List For
Rating)
ST-052 315-A