Channel Set-Up - Sony BRAVIA KLV-40EX430 Operating Instructions Manual

Channel Set-up

1 Digit Direct
Auto Tuning
Programme Sorting Changes the order in which the channels are stored on the TV.
Programme Labels
Manual Programme
Preset
FM Radio Set-up
18
GB
When "1 Digit Direct" is set to "On", select a channel using one preset number
button (0 - 9) on the remote.
~ • When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above
entering next digit using the remote.
Tunes in all the available channels.
Assigns a channel name of your choice up to seven letters or numbers.
Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Colour System", press
PROG +/– to select the programme number with the channel. You cannot select
a programme number that is set to "Skip" (page 18).
"Programme"/"TV System"/"Frequency": Presets programme channels
manually.
1
Select "Programme", then press
F f
2
Press / to select the programme number you want to manually tune
(if tuning a VCR, select channel 0), then press RETURN.
F f
3
Press / to select "TV System", then press
F f
4
Press / to select your TV broadcast systems, then press
F f
5
Press / to go to the frequency range indication ("VHF Low", "VHF High" or
"UHF"), then press
6
Tune the channels as follows:
G g
Press / to search for the next available channel. When a channel has been
found, the search will stop. To continue searching, press
Repeat the procedure above to preset other channels manually.
"Label": Assigns a name of your choice, up to seven letters or numbers, to the
selected channel.
"AFT": Fine-tune the selected channel manually. When "On" is selected, the fine
tuning is performed automatically.
"Audio Filter": Improves the sound of individual channels when distortion occurs
in mono broadcasts in TV system "B/G", "I" and "D/K".
~ • You cannot receive stereo or dual sound when "High" is selected.
"Skip": Skips unused channels when you press PROG +/– to select channels.
(You can still select a skipped channel using the number buttons.)
"Colour System": Selects the colour system ("Auto", "PAL", "SECAM",
"NTSC3.58", "NTSC4.43" or "PAL60") according to the channel.
"Signal Level": Displays the signal level for programme currently being watched.
Preset up to 30 FM radio stations that can be received in your area.
"Auto Tuning": Automatically tune and store all the available channels.
1
Select "Auto Tuning", then press
2
Select "OK" to automatically tune in all the available channels.
"FM Radio Presets": Manually tune and store each available channel one at a
time.
~ • To enable this feature, access to FM Radio mode by using Home Menu (page 12),
then preset your desired FM radio stations according to the steps mentioned above.
.
.
.
.
.
G g
/ .